listen_addresses = 'localhost'
port = {{ nyaapantsu_pgpool_port }}
socket_dir = '/tmp'
listen_backlog_multiplier = 2
# Set the backlog parameter of listen(2) to
# num_init_children * listen_backlog_multiplier.
# (change requires restart)

pcp_listen_addresses = '*'
pcp_port = 9898
pcp_socket_dir = '/tmp'

backend_hostname0 = 'localhost'
backend_port0 = 5432
backend_weight0 = 1
backend_data_directory0 = '/var/lib/pgsql/9.6/data'
backend_flag0 = 'ALLOW_TO_FAILOVER'
# Controls various backend behavior
# ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER
enable_pool_hba = off
# Use pool_hba.conf for client authentication
pool_passwd = ''
# File name of pool_passwd for md5 authentication.
# "" disables pool_passwd.
# (change requires restart)
authentication_timeout = 60
# Delay in seconds to complete client authentication
# 0 means no timeout.

# - SSL Connections -

ssl = off
# Enable SSL support
# (change requires restart)
#ssl_key = './server.key'
# Path to the SSL private key file
# (change requires restart)
#ssl_cert = './server.cert'
# Path to the SSL public certificate file
# (change requires restart)
#ssl_ca_cert = ''
# Path to a single PEM format file
# containing CA root certificate(s)
# (change requires restart)
#ssl_ca_cert_dir = ''
# Directory containing CA root certificate(s)
# (change requires restart)


#------------------------------------------------------------------------------
# POOLS
#------------------------------------------------------------------------------

# - Pool size -

num_init_children = 32
# Number of pools
# (change requires restart)
max_pool = 4
# Number of connections per pool
# (change requires restart)

# - Life time -

child_life_time = {{ child_life_time }}
# Pool exits after being idle for this many seconds
child_max_connections = 0
# Pool exits after receiving that many connections
# 0 means no exit
connection_life_time = 0
# Connection to backend closes after being idle for this many seconds
# 0 means no close
client_idle_limit = 0
# Client is disconnected after being idle for that many seconds
# (even inside an explicit transactions!)
# 0 means no disconnection


#------------------------------------------------------------------------------
# LOGS
#------------------------------------------------------------------------------

# - Where to log -

log_destination = 'stderr'
# Where to log
# Valid values are combinations of stderr,
# and syslog. Default to stderr.

# - What to log -

log_line_prefix = '%t: pid %p: '   # printf-style string to output at beginning of each log line.

log_connections = off
# Log connections
log_hostname = off
# Hostname will be shown in ps status
# and in logs if connections are logged
log_statement = off
# Log all statements
log_per_node_statement = on
# Log all statements
# with node and backend informations
log_standby_delay = 'none'
# Log standby delay
# Valid values are combinations of always,
# if_over_threshold, none

# - Syslog specific -

syslog_facility = 'LOCAL0'
# Syslog local facility. Default to LOCAL0
syslog_ident = 'pgpool'
# Syslog program identification string
# Default to 'pgpool'

# - Debug -

debug_level = 0
# Debug message verbosity level
# 0 means no message, 1 or more mean verbose

#log_error_verbosity = default          # terse, default, or verbose messages

#client_min_messages = notice           # values in order of decreasing detail:
#   debug5
#   debug4
#   debug3
#   debug2
#   debug1
#   log
#   notice
#   warning
#   error

#log_min_messages = warning             # values in order of decreasing detail:
#   debug5
#   debug4
#   debug3
#   debug2
#   debug1
#   info
#   notice
#   warning
#   error
#   log
#   fatal
#   panic

#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------

pid_file_name = '/var/run/pgpool/pgpool.pid'
# PID file name
# (change requires restart)
logdir = '/var/log/pgpool'
# Directory of pgPool status file
# (change requires restart)


#------------------------------------------------------------------------------
# CONNECTION POOLING
#------------------------------------------------------------------------------

connection_cache = on
# Activate connection pools
# (change requires restart)

# Semicolon separated list of queries
# to be issued at the end of a session
# The default is for 8.3 and later
reset_query_list = 'ABORT; DISCARD ALL'
# The following one is for 8.2 and before
#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'


#------------------------------------------------------------------------------
# REPLICATION MODE
#------------------------------------------------------------------------------

replication_mode = off
# Activate replication mode
# (change requires restart)
replicate_select = off
# Replicate SELECT statements
# when in replication mode
# replicate_select is higher priority than
# load_balance_mode.

insert_lock = on
# Automatically locks a dummy row or a table
# with INSERT statements to keep SERIAL data
# consistency
# Without SERIAL, no lock will be issued
lobj_lock_table = ''
# When rewriting lo_creat command in
# replication mode, specify table name to
# lock

# - Degenerate handling -

replication_stop_on_mismatch = off
# On disagreement with the packet kind
# sent from backend, degenerate the node
# which is most likely "minority"
# If off, just force to exit this session

failover_if_affected_tuples_mismatch = off
# On disagreement with the number of affected
# tuples in UPDATE/DELETE queries, then
# degenerate the node which is most likely
# "minority".
# If off, just abort the transaction to
# keep the consistency


#------------------------------------------------------------------------------
# LOAD BALANCING MODE
#------------------------------------------------------------------------------

load_balance_mode = off
# Activate load balancing mode
# (change requires restart)
ignore_leading_white_space = on
# Ignore leading white spaces of each query
white_function_list = ''
# Comma separated list of function names
# that don't write to database
# Regexp are accepted
black_function_list = 'nextval,setval,nextval,setval'
# Comma separated list of function names
# that write to database
# Regexp are accepted

database_redirect_preference_list = ''
# comma separated list of pairs of database and node id.
# example: postgres:primary,mydb[0-4]:1,mydb[5-9]:2'
# valid for streaming replicaton mode only.

app_name_redirect_preference_list = ''
# comma separated list of pairs of app name and node id.
# example: 'psql:primary,myapp[0-4]:1,myapp[5-9]:standby'
# valid for streaming replicaton mode only.
allow_sql_comments = off
# if on, ignore SQL comments when judging if load balance or
# query cache is possible.
# If off, SQL comments effectively prevent the judgment
# (pre 3.4 behavior).

#------------------------------------------------------------------------------
# MASTER/SLAVE MODE
#------------------------------------------------------------------------------

master_slave_mode = off
# Activate master/slave mode
# (change requires restart)
master_slave_sub_mode = 'slony'
# Master/slave sub mode
# Valid values are combinations slony or
# stream. Default is slony.
# (change requires restart)

# - Streaming -

sr_check_period = 0
# Streaming replication check period
# Disabled (0) by default
sr_check_user = 'nobody'
# Streaming replication check user
# This is necessary even if you disable
# streaming replication delay check with
# sr_check_period = 0
sr_check_password = ''
# Password for streaming replication check user
delay_threshold = 0
# Threshold before not dispatching query to standby node
# Unit is in bytes
# Disabled (0) by default

# - Special commands -

follow_master_command = ''
# Executes this command after master failover
# Special values:
#   %d = node id
#   %h = host name
#   %p = port number
#   %D = database cluster path
#   %m = new master node id
#   %H = hostname of the new master node
#   %M = old master node id
#   %P = old primary node id
#   %r = new master port number
#   %R = new master database cluster path
#   %% = '%' character

#------------------------------------------------------------------------------
# HEALTH CHECK
#------------------------------------------------------------------------------

health_check_period = 0
# Health check period
# Disabled (0) by default
health_check_timeout = 20
# Health check timeout
# 0 means no timeout
health_check_user = 'nobody'
# Health check user
health_check_password = ''
# Password for health check user
health_check_max_retries = 0
# Maximum number of times to retry a failed health check before giving up.
health_check_retry_delay = 1
# Amount of time to wait (in seconds) between retries.
connect_timeout = 10000
# Timeout value in milliseconds before giving up to connect to backend.
# Default is 10000 ms (10 second). Flaky network user may want to increase
# the value. 0 means no timeout.
# Note that this value is not only used for health check,
# but also for ordinary conection to backend.

#------------------------------------------------------------------------------
# FAILOVER AND FAILBACK
#------------------------------------------------------------------------------

failover_command = ''
# Executes this command at failover
# Special values:
#   %d = node id
#   %h = host name
#   %p = port number
#   %D = database cluster path
#   %m = new master node id
#   %H = hostname of the new master node
#   %M = old master node id
#   %P = old primary node id
#   %r = new master port number
#   %R = new master database cluster path
#   %% = '%' character
failback_command = ''
# Executes this command at failback.
# Special values:
#   %d = node id
#   %h = host name
#   %p = port number
#   %D = database cluster path
#   %m = new master node id
#   %H = hostname of the new master node
#   %M = old master node id
#   %P = old primary node id
#   %r = new master port number
#   %R = new master database cluster path
#   %% = '%' character

fail_over_on_backend_error = on
# Initiates failover when reading/writing to the
# backend communication socket fails
# If set to off, pgpool will report an
# error and disconnect the session.

search_primary_node_timeout = 10
# Timeout in seconds to search for the
# primary node when a failover occurs.
# 0 means no timeout, keep searching
# for a primary node forever.

#------------------------------------------------------------------------------
# ONLINE RECOVERY
#------------------------------------------------------------------------------

recovery_user = 'nobody'
# Online recovery user
recovery_password = ''
# Online recovery password
recovery_1st_stage_command = ''
# Executes a command in first stage
recovery_2nd_stage_command = ''
# Executes a command in second stage
recovery_timeout = 90
# Timeout in seconds to wait for the
# recovering node's postmaster to start up
# 0 means no wait
client_idle_limit_in_recovery = 0
# Client is disconnected after being idle
# for that many seconds in the second stage
# of online recovery
# 0 means no disconnection
# -1 means immediate disconnection


#------------------------------------------------------------------------------
# WATCHDOG
#------------------------------------------------------------------------------

# - Enabling -

use_watchdog = off
# Activates watchdog
# (change requires restart)

# -Connection to up stream servers -

trusted_servers = ''
# trusted server list which are used
# to confirm network connection
# (hostA,hostB,hostC,...)
# (change requires restart)
ping_path = '/bin'
# ping command path
# (change requires restart)

# - Watchdog communication Settings -

wd_hostname = ''
# Host name or IP address of this watchdog
# (change requires restart)
wd_port = 9000
# port number for watchdog service
# (change requires restart)
wd_authkey = ''
# Authentication key for watchdog communication
# (change requires restart)

# - Virtual IP control Setting -

delegate_IP = ''
# delegate IP address
# If this is empty, virtual IP never bring up. 
# (change requires restart)
ifconfig_path = '/sbin'
# ifconfig command path
# (change requires restart)
if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0'
# startup delegate IP command
# (change requires restart)
if_down_cmd = 'ifconfig eth0:0 down'
# shutdown delegate IP command
# (change requires restart)

arping_path = '/usr/sbin'           # arping command path
# (change requires restart)

arping_cmd = 'arping -U $_IP_$ -w 1'
# arping command
# (change requires restart)

# - Behaivor on escalation Setting -

clear_memqcache_on_escalation = on
# Clear all the query cache on shared memory
# when standby pgpool escalate to active pgpool
# (= virtual IP holder).
# This should be off if client connects to pgpool
# not using virtual IP.
# (change requires restart)
wd_escalation_command = ''
# Executes this command at escalation on new active pgpool.
# (change requires restart)

# - Lifecheck Setting - 

# -- common --

wd_lifecheck_method = 'heartbeat'
# Method of watchdog lifecheck ('heartbeat' or 'query')
# (change requires restart)
wd_interval = 10
# lifecheck interval (sec) > 0
# (change requires restart)

# -- heartbeat mode --

wd_heartbeat_port = 9694
# Port number for receiving heartbeat signal
# (change requires restart)
wd_heartbeat_keepalive = 2
# Interval time of sending heartbeat signal (sec)
# (change requires restart)
wd_heartbeat_deadtime = 30
# Deadtime interval for heartbeat signal (sec)
# (change requires restart)
heartbeat_destination0 = 'host0_ip1'
# Host name or IP address of destination 0
# for sending heartbeat signal.
# (change requires restart)
heartbeat_destination_port0 = 9694 
# Port number of destination 0 for sending
# heartbeat signal. Usually this is the
# same as wd_heartbeat_port.
# (change requires restart)
heartbeat_device0 = ''
# Name of NIC device (such like 'eth0')
# used for sending/receiving heartbeat
# signal to/from destination 0.
# This works only when this is not empty
# and pgpool has root privilege.
# (change requires restart)

#heartbeat_destination1 = 'host0_ip2'
#heartbeat_destination_port1 = 9694
#heartbeat_device1 = ''

# -- query mode --

wd_life_point = 3
# lifecheck retry times
# (change requires restart)
wd_lifecheck_query = 'SELECT 1'
# lifecheck query to pgpool from watchdog
# (change requires restart)
wd_lifecheck_dbname = 'template1'
# Database name connected for lifecheck
# (change requires restart)
wd_lifecheck_user = 'nobody'
# watchdog user monitoring pgpools in lifecheck
# (change requires restart)
wd_lifecheck_password = ''
# Password for watchdog user in lifecheck
# (change requires restart)

# - Other pgpool Connection Settings -

#other_pgpool_hostname0 = 'host0'
# Host name or IP address to connect to for other pgpool 0
# (change requires restart)
#other_pgpool_port0 = 5432
# Port number for othet pgpool 0
# (change requires restart)
#other_wd_port0 = 9000
# Port number for othet watchdog 0
# (change requires restart)
#other_pgpool_hostname1 = 'host1'
#other_pgpool_port1 = 5432
#other_wd_port1 = 9000


#------------------------------------------------------------------------------
# OTHERS
#------------------------------------------------------------------------------
relcache_expire = 0
# Life time of relation cache in seconds.
# 0 means no cache expiration(the default).
# The relation cache is used for cache the
# query result against PostgreSQL system
# catalog to obtain various information
# including table structures or if it's a
# temporary table or not. The cache is
# maintained in a pgpool child local memory
# and being kept as long as it survives.
# If someone modify the table by using
# ALTER TABLE or some such, the relcache is
# not consistent anymore.
# For this purpose, cache_expiration
# controls the life time of the cache.

relcache_size = 256
# Number of relation cache
# entry. If you see frequently:
# "pool_search_relcache: cache replacement happend"
# in the pgpool log, you might want to increate this number.

check_temp_table = on
# If on, enable temporary table check in SELECT statements.
# This initiates queries against system catalog of primary/master
# thus increases load of master.
# If you are absolutely sure that your system never uses temporary tables
# and you want to save access to primary/master, you could turn this off.
# Default is on.

check_unlogged_table = on
# If on, enable unlogged table check in SELECT statements.
# This initiates queries against system catalog of primary/master
# thus increases load of master.
# If you are absolutely sure that your system never uses unlogged tables
# and you want to save access to primary/master, you could turn this off.
# Default is on.

#------------------------------------------------------------------------------
# IN MEMORY QUERY MEMORY CACHE
#------------------------------------------------------------------------------
memory_cache_enabled = on
memqcache_method = 'shmem'
memqcache_memcached_host = 'localhost'
memqcache_memcached_port = 11211
# In bytes
memqcache_total_size = {{ memqcache_total_size_byte }}
memqcache_max_num_cache = 1000000
# Total number of cache entries. Mandatory
# if memqcache_method = 'shmem'.
# Each cache entry consumes 48 bytes on shared memory.
# Defaults to 1,000,000(45.8MB).
# (change requires restart)
# Never expire cache entries
memqcache_expire = 0
memqcache_auto_cache_invalidation = on
# Max size of each query
memqcache_maxcache = {{ memqcache_maxcache_byte }}
# TODO Assert cache_block_size > maxcache
memqcache_cache_block_size = {{ memqcache_cache_block_size_byte }}
memqcache_oiddir = '{{ memqcache_oiddir }}'
white_memqcache_table_list = ''
black_memqcache_table_list = ''
# vim: ft=cfg